#28 Fit Wove Facing and Sew

A piece of phosphor bronze ‘wire cloth’ is cut to the size needed. I have always used phosphor bronze for this though it is more difficult to find than ‘plain’ bronze or brass. Either of these would likely work well but are less durable. Paper mould wove facings typically are made from wire cloth inContinue reading “#28 Fit Wove Facing and Sew”

#25 Wove Backing

A wove mould’s backing layer is similar to that of a laid mould. I’m not sure why but wove backing wires are usually more closely spaced than those used for laid moulds. At least this was the case with the moulds I was able to examine when getting started years ago. The counting wheel ofContinue reading “#25 Wove Backing”

#26 Making the Grid for Wove Backing

The next step in making a wove mould is to add a wire that passes back and forth across the top to form a grid. This will support the fine wire screen that will be used as a facing. In the photo above the grid is nearly complete; below are the steps needed to createContinue reading “#26 Making the Grid for Wove Backing”

#27 Mould Brass Sheathing

Many moulds made for use in commercial mills are fitted with metal sheathing. Since most of the moulds I make aren’t used this way I rarely use sheathing. The mould used as an example here is a small wove mould made entirely of western larch, both ribs and frame. This choice of wood is anContinue reading “#27 Mould Brass Sheathing”